FIRESAFE
series
FIRESAFE® T60
FIRESAFE®-T60 sets new standards in active system safety. The specially designed system made of insulating foam and defined layers of metal results in significantly improved behavior in the event of a fire. FIRESAFE®-T60 is identical in construction to types FIRESAFE®-T30 and FIRESAFE®-T90, but with two layers of thermal insulation with metal separating layers between the layers. Fire protection time: 60 minutes
average temperature increase in the medium pipe after (load: ETK*)
10 min | 20 min | 30 min | 45 min | 60 min | 75 min | 90 min |
1° | 5° | 11° | 52° | 303° | 450° | - |
*ETK: standard temperature-time curve, according to DIN EN 1363-1, section 5.1.1
Protection of people and systems
The protection of people and industrial facilities is generally the focus of planning work. This is particularly true for environments that must be considered at risk from the outset. The fire represents a special case, because practice proves: It is not the actual source of the fire that causes major damage, but rather the rapid spread of the fire! Industrial companies prevent this by setting up modern firefighting systems. Fires can be fought quickly and effectively if the remaining time allows! In many cases, however, attention must be paid to the pipeline and the medium flowing in it. The cause of the fire is not the pipeline itself. Likewise, the material of the insulation does not significantly support a fire that develops. However, if the fire can have a destructive effect on the medium pipe, explosions or even the complete loss of the system can result. To avoid this, we designed FIRESAFE®-T60.
Active plant safety
The FIRESAFE®-T60 design sets new standards in terms of active system safety. The specially designed system made of insulating foam and defined layers of metal results in significantly improved behavior in the event of a fire. The FIRESAFE®-T60 system is based on the coking effect of PUR foam. In the event of a fire, a protective layer is formed, similar to the behavior of tree stumps in forest fires. This protective layer keeps the high temperature away for a very long time and therefore ensures more safety for your medium. Tests in independent specialist institutes produce impressive results. Through the appropriate combination of different foams, guaranteed service life (service life: time until the temperature on the medium pipe reaches 450°) for the medium pipe of up to 90 minutes can be achieved! With FIRESAFE®-T90 And therefore even more time for effective and active fire fighting with the greatest possible protection of the systems and the surrounding area.
Reduction in setup costs
The use of our proven composite system such as: FIRESAFE®-T60 also saves a significant amount of time during installation and transport. The combination of medium pipe, highly effective insulating foam and dust- and moisture-proof outer jacket offers optimal handling and thus a system designed for quick and economical assembly. Costs for erecting scaffolding are largely eliminated because only the seams and not the entire area are involved Cable must be insulated. Weather phenomena largely lose their influence on the assembly work. The robust and sturdy construction of the FIRESAFE®-T60 also supports quick and time-saving installation. FIRESAFE®-T60 allows the clamps to be attached to the outer casing. This avoids thermal or cold bridges, the typical weak points in the pipeline.
data sheet
FIRESAFE® T60 | TD-2012-001-DE-B24-08-2012 |
You might also be interested in these products:
FIRESAFE®-T30
FIRESAFE®-T30 sets new standards in active system safety. Fire protection duration: 30min
FIRESAFE® T90
FIRESAFE®-T90 sets new standards in active system safety. Fire protection duration: 90min